Special Control Functions - Hamilton Beach HBH850 Operation Manual

Special Control Functions

Pressing the MORE button displays cycle count screens and other diagnostic information, and also allows
you to access special functions.
Use L or M button to scroll through the options. Press START button to select that option.
SPECIAL FUNCTIONS
CUSTOMER SERV. INFO
START TO SELECT
RUN COOLDOWN CYCLE
START TO SELECT
AUTOBLEND 1
START TO SELECT
A NOT SET
START TO SELECT
SET FACTORY DEFAULTS
START TO SELECT
Displays Hamilton Beach Commercial technical service number.
If blender motor overheats, this message will be displayed to prompt you to run
a cool-down cycle. Remove container from blender and press START. Once
cycle has completed and motor has cooled to a proper operating temperature,
display will revert to standby message.
:B
Allows you to select and edit the preset cycle for the indicated button.
Indicates that there are no stored cycle settings for the indicated button.
Resets all settings except cycle counts to factory presets.
7