Specifications; All Models; Ls200; Ls200Ndvor - Murphy L1100 Series Installation And Operation Manual

Specifications

All Models

• Body: Nickel plated steel; optional 316 stainless steel (meets NACE standard MR-01-75 for direct exposure to H
• Float: 304 stainless steel to operate in 0.5 specific gravity or heavier fluids (LS200 Series models only)
• Pressure rating: 2000 psig (13.8 MPa) [138 bar] (LS200 models only)
• O-ring: Viton

LS200

• Process connection: 2" NPT
• Temperature rating: -20 to 300°F (-29 to 149°C)
• Electrical: SPDT std. (see "Electrical" section for configuration/rating.
• Wiring: 18 AWG x 36 in. (1.0 mm

LS200NDVOR

• Process connection: 2" NPT
• DVO valve: 3 way N.C. w/manual operator, all connections 1/8" NPT (minimum 30 psig required)
• Filter/pressure regulator set:
• Regulator: 0 to 75 psig (0 to 517 kPa) [0 to 5.17 bar] range
• Maximum input pressure: 300 psig (2.07 MPa) [20.7 bar]

LS200NDVO

• Process connection: 2" NPT
• DVO valve: 3 way N.C. w/manual operator; all connections 1/8" NPT

LS200 N

• Process connection: 2" NPT
• Vent valve: 2 way N.C. snap action w/ 1/16in. (2mm) orifice and Viton seat; Inlet: 1/8" NPT; outlet 3/8" NPT

L1100

• Process connection: 1-1/2" NPT
• Pressure rating: 1500 psig (10.3 MPa) [103.2 bar]
• Float: BUOYGLAS™ operates to 0.5 specific gravity;
Optional stainless steel to operate in 0.65 specific gravity
• Electrical: SPDT switch

Approximate Shipping Weights and Dimensions

All models: 6 lb. 10 oz. (3 kg);
14 x 5 x 3-1/2 in. (356 x 127 x 89 mm)
Section 15
01-11-06
2
x 916 mm)
- 14 -
S service)
2
00-02-0563