Manual Tuning - Dab - Roberts Classic DAB 2 User Manual

Manual Tuning - DAB

Manual tuning allows you to tune your radio to a particular DAB frequency
in Band III. Any new stations found will be added to the station list. This
function can also be used to assist the positioning of the aerial or the radio
to optimise reception for a specifi c channel or frequency. Note that UK
DAB stations are located in the range of channels 11B to 12D.
1. If needed, repeatedly press and hold the Mode button until the DAB
mode is selected.
2. Press and release the Menu button. The DAB menu will show on the
display.
3. Rotate the Tuning/Select control until the display shows 'MANUAL'.
Press and release the Tuning/Select control to enter the manual tune
mode.
4. Rotate the Tuning/Select control to select the desired DAB channel.
Press and release the Tuning/Select control to tune to the chosen
frequency.
5. If a signal is present, this will be indicated on a signal strength display.
The minimum signal marker ( ) shows the minimum signal strength
needed for good DAB reception. The signal indicator chevrons increase
or decrease showing the changing signal strength as you adjust the
telescopic aerial or your radio position.
6. When a DAB signal is found, the display will show the name of the
DAB station. Any new radio stations found will be added to the list
stored in the radio.
7. Press and release the Tuning/Select control to return to normal tuning.
If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
1,2
3-7
10