Locking Channels; Setting The Gametimer - Toshiba 40L310U Manual

40L310U Toshiba 40" 1080p 60Hz LED TV

Locking channels

Note
You must create a PIN before you can
block TV programs and movies. See
Setting a new PIN
1 Press MENU, press
then press ENTER.
2 Highlight Channel Options, then press ENTER.
3 Highlight a channel, press
column with the padlock icon, then press ENTER.
Notes
• Channels labeled ATV are analog
channels. Channels labeled DTV are
digital channels.
4 Use the number buttons to enter your 4-digit PIN,
then press ENTER. A check appears in the locked
column next to the channel.
Note
To unlock a channel, highlight the
channel, then press ENTER to remove the
check.
5 Press EXIT to close the menu.
U.S.: http://support.toshiba.com Canada: http://support.toshiba.ca/support/ceg/
on page 56.
or to highlight Options,
or to move to the

Setting the GameTimer™

You can use the GameTimer™ to set a time limit for
playing a video game (30–120 minutes). When the
GameTimer expires, your TV locks out the input
source for the video game device.
1 Press MENU, press
then press ENTER.
2 Highlight Game Timer, then press ENTER.
3 Use the number buttons to enter your 4-digit PIN,
then press ENTER.
4 Highlight the amount of time you want to let the
game run before it turns off, then press ENTER.
You can select Off, 30 min, 60 min, 90 min, or
120 min.
Note
To turn off the game timer, select Off.
5 Press EXIT to close the menu.
Notes
• A message appears when 10 minutes, 3
minutes, and 1 minute are remaining.
• If your TV loses power with time remaining,
your TV enters input lock mode when power
is restored (as if the GameTimer had been
activated). To resume use, you must
deactivate the input lock. See
inputs on page 60.
or to highlight Timers,
Locking video
61