Basic Operations - Hyundai DVBT 210 User Manual

4. Wait to complete the scanning.
In case you want to stop the scanning, press the EXIT key.
The channels already found will still be stored.
5. When finished, all active channels found will be storedautomatically. The last found channel will
be played.
Now you are ready to watch digital terrestrial TV channels and radio broadcasts.
In case you skip the First Time Installation screen, you can still specify your Regional Setting
and Program Search via the onscreen setup menu.
The Regional Setting menu can be accessed via Main Menu > System Settings > Regional
Setting. Refer to Regional Setting on page 20 for details.
The Program Search menu can be accessed via Main Menu > Program Search > Automatic
Search / Manual Search. Refer to Automatic Search on page 15 for details.

Basic Operations

Once program search is completed, you can start to watch digital terrestrial TV channels and radio
broadcasts. Some typical operations are given in this chapter.
Switching On and Off
Whenever you are not using the receiver, press the Standby key on
remote control or button on the receiver to put it into standby mode.
Changing Channels
To switch between different channels, you can:
● Press OK to display the channel list and UP/DOWN to select a desired channel.
EN - 69
EN