Mazda 3-sport 2016 Manual page 212

Table of Contents

Advertisement

When Driving
i-ACTIVSENSE
Auto cancel
Under the following conditions, the
LDWS is automatically canceled and
kept on stand-by, and the LDWS warning
light (amber) in the instrument cluster
illuminates.
The system cannot detect white or
yellow lines.
The vehicle speed is less than about 65
km/h (40 mph).
The vehicle is making a sharp turn.
The vehicle is making a turn at an
inadequate speed.
The temperature inside the camera is
high or low.
The windshield around the camera is
foggy.
The windshield around the camera is
blocked by an obstruction, causing poor
forward visibility.
The lane indication (bordered line) is
indicated in the active driving display
(Type A instrument cluster
information display (Type B instrument
cluster
*1
).
The LDWS is automatically enabled when
the condition changes and the system is
operable.
*1 To determine which instrument cluster
is equipped on your Mazda, Refer to
Meters and Gauges on page 4-11 .
4–84
Mazda3_8FA4-EA-15G_Edition2.indb 84
Mazda3_8FA4-EA-15G_Edition2.indb 84
Auto cancel of warning
Under the following conditions, the
LDWS determines that the driver is
making lane changes and the warning is
automatically canceled.
The LDWS is automatically enabled after
the operation.
NOTE
) or the multi
*1
To cancel the LDWS, press the LDWS
switch. The LDWS indicator light (Green/
Amber) in the instrument cluster turns off.
The lane indication displayed in the
active driving display (Type A instrument
cluster
(Type B instrument cluster
*1 To determine which instrument cluster
The steering wheel is operated abruptly.
The brake pedal is depressed abruptly.
The accelerator pedal is depressed
abruptly.
A turn signal lever is operated (after the
turn signal lever is returned, the LDWS
warning may not operate for about 3
seconds which is the period of time
required to make a lane correction).
After about 5 seconds have elapsed
with the turn signal lever left operating,
the LDWS warning may operate if the
vehicle is close to a white or yellow line.
The sensitivity of the warning
(sensitivity with which the system
determines the driver's intentional lane
change) can be changed.
Refer to Personalization Features on
page 9-12 .
Canceling the System
) or the multi information display
*1
is equipped on your Mazda, Refer to
Meters and Gauges on page 4-11 .
) turns off.
*1
2015/07/16 8:44:54
2015/07/16 8:44:54

Advertisement

Table of Contents
loading

Table of Contents