Oil / Changing Oil - Texas Power Split 600 VG User Manual

10. Oil / changing oil

by 20
SAE 30
 Always check the oil level when the engine is placed in a horizontal position.
 Always check the oil level without fastening the oil stick.
Oil stick
Oil should be changed in accordance with the user manual for the machine.
5. Let the engine run 5 minutes, so that the oil is heated. This makes the oil flow more
easily and it is easier to complete the oil change.
6. After 5 minutes the engine is turned off. Unscrew the engine's oil drain plug and the
oil runs out of the engine. Remember to keep an appropriate container ready.
7. Put the drain plug back in its place and new oil is added to the engine.
8. You add oil by removing the oil stick and adding the correct amount of oil.
Remember to dispose the used oil so that you are of no nuisance to the nature.
Use the correct oil for the correct time of year
10-20
SAE 20
OIL CAPACITY
TG620
0,6 Litre
High
stick
Low
CHANGING OIL
Use your local recycling station..
www.texas.dk
OIL
Drain the oil
from here
below 10
SAE 10W - 30
Fill with oil
here
29