A/V Control - Gi Mini User Manual

 Timer Number: You can press [Volume Up /
Volume Down] keys to set Timer number,
and there are 8 timers in total.
 Timer Mode: There are several modes for
Timer to setting, include Off, Once, Daily,
Weekly, Monthly and Yearly.
 Timer Service: There are two options for
"Timer Service", include "TV Channel" and
"Radio Channel" (timer setting for channel
change and Wakeup/Sleep) and "Record
Radio" and "Record TV" (Timer setting for
Record the TV or Radio program to USB
Hard Disk) and Message (reminding
message).
 When you select "Channel" (timer setting for
channel change and Wakeup/Sleep) option
in "Timer Service", the screen will display like
below:
i. Channel: press [OK] key to enter
channel list and select channel that
you want to setting.
ii. Date: use number keys to input your
wakeup date.
iii. On Time: use number keys to input your
wakeup time. Once the time's up, no
matter what the system is in standby
mode or in playing mode, the system will
automatically switch to the channel you
want and start to play.
iv. Duration: After you set a time for
"Duration" item, once the time's up, the
system will automatically switch to
standby mode. If you want not work this
function, set the duration is 00:00.
 When you select "Message" (reminding
message) option in "Timer Service", the
screen will display like below:
v. Wakeup Message: press [Volume Up /
Volume Down] key to select reminding
message as Birthday, Anniversary and
General.
vi. Date, you can use number key to input your
wakeup date.
vii. On Time: use number keys to input your
wakeup time. Once the time's up, no matter
what the system is in standby mode or in
playing mode, the system will automatically
pop a reminding message.
viii. The message will always display on the
screen, you can press [Exit] key to close it.
ix. Press [left/right] button or input the number
by number keys to set the Extend Record
Time. It is use to add time at begin and end
of the record time.
x. Press [
MENU

11.5 A/V Control

When you enter to "TV System" menu, you will
see the screen like below:
 Display Mode is for switching the system
outputting video resolution. Move highlight on it
22
] key to exit the current menu.