Table of Contents
Advertisement
Getting Started
Unpacking
Due to modern mass production techniques, it is unlikely that your petrol lawn
mower is faulty or that a part is missing. If you find anything wrong, do not
operate the tool until the parts have been replaced or the fault has been rectified.
Failure to do so could result in serious personal injury.
Contents of carton
• 2 x Upper Handle Bar locking Knobs (including bolts x 2) and two plastic curved washers.
• 2 x Lower Handle locking Bolts and Knobs and two plastic curved washers.
• Spark plug spanner
Assembly
WARNING:
maintenance operations.
WARNING:
10W/30 engine oil to the Engine. Refer Page 17.
WARNING:
FULLY assembled.
It is necessary to fit the lower handle (2), handle bar (1), and catcher (5) to the mower.
Attaching the handles
It is necessary to attach both the lower handle and handle bars.
1. To attach the lower handles, first remove the two lower handle
bar locking knobs. Place the lower handle in position by
aligning the 2 lower handle ends on the inner side of the metal
mounting plates located at the back of the mower deck.
2. Once in position, insert the bolt on each side through the
lower handle (1) and then through the mounting plate (19).
Orientate the bolt so the head sits correctly in the depression
in the handle tube.
3. Once the bolts are loosely in position, fit
the plastic curved washer over the end of
the bolt. Then attach the lower handle bar
locking knobs (2) over the plastic curved
washer and secure by turning clockwise
until tight and secure.
AFTER SALES SUPPORT
• 45L Hard catcher
Stop the engine and unplug the spark plug before any repairs or
DO NOT attempt to start this mower without first adding 0.4L of SAE
Do Not attempt to start this mower without the mower first being
1800 909 909
A
U
S
2
15
www.powertoolsupport.com
1
3
email: help@globalpowerbrands.com
4
43668
Hide quick links:
Advertisement
Table of Contents
