Mounting Over A Washing Machine; Connecting To The Drain; Adjusting The Feet - Beko DPU 7360 X User Manual

Hide thumbs Also See for DPU 7360 X:
Table of Contents

Advertisement

Available languages

Available languages

should never be operated without
undercounter installation part.
Dryer Depth
60 cm
Stock
number of
under-bench
2979700100 2973600100
installation
part
Leave at least 3 cm of space around
the sides and the rear wall of the
product when installing it under a
counter or in a cupboard.
Mounting over a washing
machine
A fixing device should be used
between the two machines
when installing the dryer above a
washing machine. The fixing device
(2977200100 white/2977200400
grey) must be installed by the
Authorized Service Agent.
Total weight of the washing machine
and the dryer -with full load- when
they are placed on top of each other
reaches to approx. 180 kilograms.
Place the products on a solid floor
that has sufficient load carrying
capacity!

Connecting to the drain

In products equipped with condenser
unit, water accumulates in the water tank
during the drying cycle. You should drain
accumulated water after each drying
cycle.
You can directly drain accumulated water
through the water drain hose supplied
with the product instead of periodically
draining the water collected in the water
tank.
54 cm
Connecting the water drain hose
1. Pull hose in the product by hand in
order to disconnect it from where it is
connected. Do not use any tools to
remove the hose.
2. Connect one end of the drain hose
supplied separately with the product
to the connection point from where
you removed the hose of the product
in previous step.
3. Connect the other end of the drain
hose directly to the wastewater drain
or to the washbasin.
A
Hose must be fixed in every type
of connection. Your house will be
flooded if the hose comes loose
during water discharge.
C
Water drain hose should be attached
to a height of maximum 80 cm.
C
Make sure that the water drain hose
is not stepped on and it is not folded
between the drain and the machine.

Adjusting the feet

In order to ensure that the product
operates more silently and vibration-free,
it must stand level and balanced on its
feet. Balance the machine by adjusting
the feet.
Turn the feet to left or right until the
7 EN

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents