Viewing Pictures From The Connected Equipment - Sony KDL-37S3100 Operating Instructions Manual

Viewing pictures from
the connected
equipment
Turn on the connected equipment, then
press / to display the connected
equipment list. Press F/f to select the
desired input source, then press
highlighted item is selected if 2 seconds
pass without any operation after pressing
F/f.) When the input source is set to "Skip"
in the "Video Labels" under the "AV Set-up"
menu (page 29), that input does not appear
in the list.
z
Press / on the top edge of the TV to display the
connected equipment list and select the desired input source.
You can also press F/f to select the desired input source.
Then wait for 2 seconds to display the selected input source.
Additional operations
To Press
Return to normal TV DIGITAL or ANALOG.
mode
2
Change the volume of
the connected HDMI
control compatible
audio system
%
Mute the sound of the .
connected HDMI Press again to restore.
control compatible
audio system
Using the Tools menu
Press TOOLS to display the following options when
viewing pictures from connected equipment.
Options Description
Close Closes the Tools menu.
Picture Mode (except See page 22.
PC input mode)
Display Mode (in PC See page 22.
input mode only)
Sound Mode See page 24.
Speaker See page 29.
. (The
+/-.
Options Description
Twin Picture (except See page 20.
PC input mode)
PIP (in PC input See page 20.
mode only)
Single Picture (in Returns to single picture mode.
Twin Picture and PIP
mode only)
Audio Swap (in PIP See page 20.
mode only)
Auto Adjustment (in See page 32.
PC input mode
(except HDMI PC
input) only)
Horizontal Shift (in See page 32.
PC input mode only)
Vertical Shift (in PC See page 32.
input mode only)
i Volume Adjusts the volume of the
headphones.
Sleep Timer (except See page 30.
PC input mode)
Power Saving See page 31.
~
The options displayed vary depending on the input source.
Continued
19
GB