Table of Contents
Advertisement
Main Menu
Table of Contents
Playing a CD, CD Changer
On vehicles without navigation system
To load multiple CDs in one
operation:
1.
Press and hold the LOAD button
until you hear a beep and see
''LOAD'' in the display, then
release the button.
2.
On the upper right side of the
display, the disc number for an
empty position will begin blinking,
and the green CD load indicator
will come on.
3.
Insert the CD into the CD slot.
Insert it only about halfway; the
drive will pull it in the rest of the
way. You will see ''BUSY'' in the
display. The CD loaded indicator
turns red and blinks as the CD is
loaded.
222
4.
When ''LOAD'' appears again in
the display, insert the next CD into
the CD slot.
5.
Repeat this until all six positions
are loaded. The system will then
begin playing last CD loaded.
If you are not loading CDs into all six
positions, press the LOAD button
again after the last CD has loaded.
The system will begin playing the
last CD loaded.
If you stop loading CDs before all six
positions are filled, the system will
wait for ten seconds, then stop the
load operation and begin playing the
last CD loaded.
To load a single CD:
1.
Press and release the LOAD
button.
2.
When the disc number for an
empty position starts to blink and
the green CD load indicator comes
on, you will see LOAD in the
display. Insert the disc into the CD
slot. Insert it only about halfway,
the drive will pull it in the rest of
the way.
3.
The system will load the CD and
begin playing it.
Advertisement
Table of Contents
