Table of Contents
Advertisement
Main Menu
Table of Contents
Playing the AM/FM Radio
The preset frequencies will be lost if
your vehicle's battery goes dead, is
disconnected, or the radio fuse is
removed.
AUTO SELECT
−
If you are
traveling far from home and can no
longer receive your preset stations,
you can use the auto select feature to
find stations in the local area.
Press the A. SEL button. ''A.SEL''
flashes in the display, and the system
goes into scan mode for several
seconds. It stores the frequencies of
six AM and twelve FM stations in
the preset buttons.
You will see a ''0'' displayed after
pressing a preset button if auto
select cannot find a strong station for
every preset button.
206
If you do not like the stations auto
select has stored, you can store
other frequencies on the preset
buttons. Use the TUNE, SEEK, or
SCAN functions to find stations, then
store them in the preset buttons as
described.
To turn off auto select, press the
A. SEL button. This restores the
presets you originally set.
Adjusting the Sound
Press the SOUND (TUNE) knob
repeatedly to display the bass, treble,
balance, and fader settings.
Each mode is shown in the display as
it changes. Turn the SOUND
(TUNE) knob to adjust the setting to
your liking. When the level reaches
the center, you will see ''CENTER''
in the display. The system will
automatically return the display to
the selected audio mode about 5
seconds after you stop adjusting a
mode.
Treble/Bass
−
Use the TRE/BAS
modes to adjust the tone to your
liking.
Balance/Fader
−
These two
modes adjust the strength of the
sound coming from each speaker.
BAL adjusts the side-to-side strength,
while FAD adjusts the front-to-back
strength.
Advertisement
Table of Contents
