To Install/Remove Battery Pack; Chain Oil System - Echo CCS-58V Operator's Manual

OPERATION

To Install/Remove Battery Pack

See Figure 5.
This product will accept Echo 58 V lithium-ion
battery packs only.
For complete charging instructions, refer to the
Operator's Manuals for your ECHO battery pack
and charger models.
WARNING
Always remove battery pack from your tool
when you are assembling parts, making ad-
justments, cleaning, carrying, transporting or
when not in use. Removing battery pack will
prevent accidental starting that could cause
serious personal injury.
NOTE: To avoid serious personal injury, always
remove the battery pack and keep hands clear of
the lock-out button when carrying or transporting
the tool.
To install battery pack:
 Align grooves on battery pack with raised ribs
in the tool's battery port and place the battery
pack in the tool.
WARNING
Make sure the latch on the
and the battery pack is fully seated and secure
in the battery port before beginning operation.
Failure to securely seat the battery pack could
cause the battery pack to fall out, resulting in
serious personal injury.
To remove battery pack:
 Press the battery latch button on the tool and
pull the battery pack out using the handle.
NOTICE
Remove battery pack from unit. Fill oil tank with
bar and chain lubricant (not provided) before
starting the chain saw. Failure to lubricate the
chain will cause damage to the bar and chain.
tool snaps in place
English
LATCH

Chain Oil System

See Figure 6.
 Use bar and chain lubricant (not provided) that is
formulated to perform over a wide temperature
range with no dilution required.
NOTE: Do not use dirty, used or otherwise
contaminated oils. Damage may occur to the
bar or chain.
 Carefully pour the bar and chain oil into the tank.
 Check and fill the oil tank when battery is re-
charged, or as needed.
NOTE: It is normal for lubricant to seep from the
saw when not in use. To prevent seepage, empty
the oil tank after each use. When storing the unit
for a long period of time (three months or longer) be
sure the chain is lightly lubricated; this will prevent
rust on the chain and bar sprocket.
BATTERY
PACK
BATTERY
PORT
Fig. 5
QUICK VIEW
OIL INDICATOR
Fig. 6
15