Indication Tone; Factory Reset; Care And Maintenance - Mio BTH300 Quick Start Manual

Table of Contents

Advertisement

Available languages

Available languages

8. Indication tone

Indication tone
Continuous two prompt tone every 10 seconds
Three "dong" warning tone every 30 seconds

9. Factory Reset

In the turned off mode, press and hold the MFB and
After the reset, the paired list of devices will be deleted.

10. Care and Maintenance

Keep product away from damp/wet places as it is not water resistant
Keep the product away from direct sunlight or hot places. High temperatures will shorten the life of electronic devices, destroy the battery or distort certain
plastic parts
Not suitable for sporting activities
Do not expose to extreme temperatures of hot/cold as it may result in damage
Do not disassemble the headset. Warranty will be null and void
Do not drop the headset as it might damage the internal circuits / speakers
Do not use harmful chemicals or cleaning solutions to clean
Caution:
Do not place the battery in fire or apply heat to the battery
Do not pierce the battery with nails, strike the battery with a hammer, step on the battery, or otherwise damage the outer casing.
Do not subject the battery pack to strong impacts or shocks.
Do not expose the battery to water or salt water or allow the battery to get wet.
Do not disassemble or modify the battery. The battery contains safety and protection devices which, if damaged, may cause the battery to generate heat,
rupture or ignite.
Do not place the battery on or near fire, stoves or other high temperature locations.
Do not leave the battery in direct sunlight or use or store the battery inside cars in hot weather. Doing so may cause the battery to generate heat, rupture or
ignite. Using the battery in this manner may also result in loss of performance and a shortened life expectancy.
Never short circuit, reverse polarity, disassemble, damage or heat the battery pack over 100°C (212°F).
Warranty:
This product is covered by a limited warranty from Everik to the original purchaser that this product is free from defects in workmanship and materials for 1 year
from the date of purchase (damages through normal wear and tear, alteration, misuse, neglect, accident, or Act of God not included). During the warranty period
and upon verification of defects, this product will be replaced when returned with proper proof of purchase. This limited warranty is in lieu of all other warranties,
express or implied, including, but not limited to, implied warranty of merchantability or fitness for a particular use.
FOR ALL WARRANTY CLAIMS: Please contact the location where purchased.
4
Status of the headset
Conversation mode and microphone mute
Low battery
button about 8 seconds simultaneously and release it until the red and blue LED is on.
www.everik.com
BTH300.KM.072013.IM

Advertisement

Table of Contents
loading

Table of Contents