Making Calls; Indication Tone; Led Indicator - Mio BTH200 User Manual

5. Making calls

Function
Cancel calling
Answer a call
Reject a call
End a call
Volume up
Volume down
Call transfer (cell phone to headset)
Microphone mute
Cancel mute
Voice dial
Redial last number
Note: Pairing mode will last 2 minutes. If not devices can be connected after 2 minutes, it will return to standby mode automatically.

6. LED indicator

7. Indication tone

8. Factory Reset
In turned off mode, press and hold MFB and volume up "+" button about 8 seconds, you will see red LED on 1 second and hear two tones.

After factory reset, the paired list of devices will be deleted.
3
Status of BTH100
Calling
Incoming ring
Incoming ring
During a call
During a call
During a call
During a call
During a call
During a call
Standby mode and connected to a device
Standby mode and connected to a device
A. Charging
LED Indicator
Red LED on
Red LED off
B. Pairing with Bluetooth device
LED Indicator
Red and blue LED flashes alternately
Blue LED flashes once quickly every 2 seconds
Blue LED flashes twice quickly every 4 seconds
Blue LED flashes three times quickly every 4 seconds
Blue LED flashes quickly
Blue LED flashes once quickly every 4 seconds
Red LED flashes twice every 30 seconds
Indication tone
Continuous two prompt tone every 10 seconds
Three "dong" warning tone every 20 seconds
Operation
Press MFB button once
Press MFB button once
Press and hold MFB button for 2 seconds and release it until hearing
indication tone
Press MFB button once
Press + button
Press －button
Press MFB button for 2 seconds
Double click MFB button
Double click MFB button
Press < button about 2 seconds and release it until hear a prompt tone
Double click MFB button
Status of headset
Charging
Finish Charging
Status of headset
Pairing mode
Not connect device
Have already connected HFP or A2DP
Connect HFP and A2DP simultaneously
Calling/incoming call
During a call
Low battery
Status of the headset
Conversation mode and microphone mute
Low battery
www.everik.com BTH200.KM.072013.IM