Setting A Wash Program; Changing A Wash Program - Venini VDW61S User Manual

Setting a wash program

Make sure that the before first use section has been
followed.
o Check whether the appliance needs rinse aid adding to it.
o Pull out the top and bottom baskets, then load them in
accordance with the loading instructions.
o Push the top and bottom baskets fully back into position.
o Add detergent.
o Close the dispenser before starting the dishwasher
o Turn the appliance on by using the ON/OFF button.
o IMPORTANT: Wait for 5 seconds before pressing the
program selection button, otherwise the appliance may
not function correctly.
o Press the program selection button to choose an appropriate
wash program for the load that you are washing. Where
applicable, the relevant program indicator will light to show
which program you have selected.
o Close the door firmly, so that you hear the door lock click shut.
o After a few seconds, you will hear the appliance begin to fill with
water and the wash program will have started.
Changing the wash program
IMPORTANT: This should only be attempted when the cycle has
only just started, otherwise the detergent tablet may have
already released or you could have hot water escaping.
o Turn off the appliance using the on/off button and wait for a
minute.
o Turn the appliance back on using the on/off button.
o Select your new wash program.
o After about 10 seconds you will hear the appliance begin to fill
with water and the wash program will have started.
19