GLOBAL ASSISTIVE DEVICES The VibraLITE 2 Manual

VIBRATION WATCH
with:
Vibration Alarm
(won't disturb others).
Beep Alarm (optional)
Electro-Luminescent (EL) back light
(for viewing display at night).
Second Clock (great when traveling in a
different time zone).
Two Alarm Settings (use for daily
reminders, wake up & snooze,
medication)
Countdown Timer with manual reset
can be set for minutes & hours. (Use for
reminders such as medication, medical
conditions, timing presentations or
procedures, parking, cooking).
Hourly Alert/Chime Option
12 or 24 Hour clock
Stopwatch
OPERATING MODES
Your watch has six operating modes:
To go from one operating mode to
another, repeat pressing the MODE
button for each mode to be displayed.
The operating modes will rotate in the
order as listed above.
TO BECOME FAMILIAR WITH THE
OPERATING MODES & THEIR SYMBOLS,
ROTATE THROUGH EACH MODE BY
PRESSING THE 'MODE" BUTTON.
FIRST TIME SETTING OF YOUR
CALENDAR/CLOCK
(You must have this set for your Alarm
Settings to be accurate.)
When setting the Calendar & Clock, the
rotation for setting is Seconds, Hour,
Minutes, 12/24Hr, Date, Month, Day of
Week. ONLY when the digits are
BLINKING can you set or change the
setting. The clock will stop blinking
when no button is pressed for two
minutes. You cannot switch to another
mode of operation while the display is
blinking. To exit and stop the blinking,
push LAP/RESET button.
1. Repeat pressing the MODE button
until the (1) CALENDAR CLOCK
operating mode shows on the display.
2. Press & Hold the LAP/RESET button
until the seconds digits begin to
BLINK.
Press the START/STOP button to
reset the seconds display to 00.
3. Press the MODE button. The hour
digits will begin to BLINK.
Press the START/STOP button to
rotate to the correct hour of the day.
WHEN IN THE 12 HR MODE, A PM
INDICATOR WILL APPEAR ON THE
DISPLAY ABOVE AND LEFT OF THE
HOUR DIGITS. AS YOU ROTATE TO
12 HOURS THE PM MUST SHOW
FOR SETTING CORRECT TIME FOR
AFTERNOON OR EVENING. BE
SURE TO SET CORRECTLY FOR
THE CURRENT TIME OF DAY.
4. Press the MODE button to go to the
minute digits. The minute digits will
begin to BLINK.
Press the START/STOP button to
rotate to the correct minute.
5. Press the MODE button and the 12H
or 24H mode will show and BLINK on
the display. Press the START/STOP
button to change from 12H to 24H or
from 24H to 12H preference.
6. Press the MODE button for the date of
the month. A number will BLINK at
the top left corner of the display.
Press the START/STOP button to
rotate to the correct date of the
month. (1 - 31)
7. Press the MODE button for the month.
A number will BLINK on the display.
Press the START/STOP button to
rotate to the current month of the
year. (Example; 6 for June, 9 for
September)
8. Press the MODE button for the Day of
the Week. A two-letter abbreviation
at the top of the display will BLINK.
Press the START/STOP button to
rotate to the correct day. (Example
TU for Tuesday; TH for Thursday)
9. Press the LAP/RESET button when
you have finished the correct set up.
The display will stop blinking.
HOW TO SET AN ALARM CLOCK
(Setting procedure is the same for
BOTH alarms)
1. Repeat Pressing the MODE button to
rotate to the alarm operating mode
you want: A1 = 1st ALARM or A2 =
2ND ALARM.
2. Press & Hold the LAP/RESET button
until the hour digits BLINK.
Press the START/STOP button to
rotate to the hour wanted.
Note: In the 12 Hr Mode, remember
to use the PM indicator for correct
setting.
3. Press the MODE button to go to the
minutes. The minutes will BLINK.
Press the START/STOP button to
rotate to the minute wanted.
4. Press the LAP/RESET Button when
finished. The display will stop
blinking. The set icon will show on the
display. Your alarm is set.
When A1 Alarm is set the icon shows
beside the PM indicator under the
Alm1.
When A2 Alarm is set the icon shows
on the display beside the A1 icon
under the Alm2 icon. Note: Calendar
Clock Timer must be set for Alarm
Time activation to be correct.
HOW TO TURN ON AND OFF THE
HOURLY ALERT
Note: Hourly Alert is a short single
reminder
1. Repeat Pressing the MODE button
and select either 1st ALARM = A1 or
2ND ALARM = A2
2. Repeat Pressing START/STOP button
until the Hourly Alert indicator
(located beside the Alm2 indicator)
shows on the display. Hourly alert is
on when icon shows. Hourly alert is
off when icon doesn't show.
ON/OFF SETTINGS OF ALARMS:
Note: To turn on or off First Alarm you
must be in the A1 mode.
To turn on or off Second Alarm you
must be in the A2 mode.
Repeat Pressing the MODE button to
show alarm you wish to turn off or on.
1ST OR 2ND ALARM.
Repeat Pressing the START/STOP
button to rotate, alarm on (hourly alert) &
alarm off. When Icon(s) shows, alarm is