Multitech MultiMobile MT128ZLX-NT User Manual page 246

MultiMobile MT128ZLX User Guide
Command Options
AT&L0
AT&L1
AT&L2
AT&L3
AT&L4
AT&L5
AT&L6
AT&L7
AT&L8
AT&L9
AT&N0=0
AT&N0=1
AT&P0
AT&P1
AT&P2
Command Options
AT&P3
AT&P4
AT&P5
AT&P6
AT&P7
AT&P8
AT&W0
AT&W1
AT&W2
AT&W3
AT&W4
AT&W5
AT&W6
AT&W7
AT&W8
AT&W9
Command Options
AT&Z0
AT&V
AT&Zn=x
n
x
Function & Description
Load user profile 0 to active RAM.
Load user profile 1 to active RAM.
Load user profile 2 to active RAM.
Load user profile 3 to active RAM.
Load user profile 4 to active RAM.
Load user profile 5 to active RAM.
Load user profile 6 to active RAM.
Load user profile 7 to active RAM.
Load user profile 8 to active RAM.
Load user profile 9 to active RAM.
Set Single-Link mode for Async to Sync PPP Conversion.
Set Multi-Link mode for Async to Sync PPP Conversion.
Copy user profile 0 to profile E, and set it as power-up profile.
Copy user profile 1 to profile E, and set it as power-up profile.
Copy user profile 2 to profile E, and set it as power-up profile.
Function & Description
Copy user profile 3 to profile E, and set it as power-up profile.
Copy user profile 4 to profile E, and set it as power-up profile.
Copy user profile 5 to profile E, and set it as power-up profile.
Copy user profile 6 to profile E, and set it as power-up profile.
Copy user profile 7 to profile E, and set it as power-up profile.
Copy user profile 8 to profile E, and set as it power-up profile.
Save current active settings in RAM to user profile 0.
Save current active settings in RAM to user profile 1.
Save current active settings in RAM to user profile 2.
Save current active settings in RAM to user profile 3.
Save current active settings in RAM to user profile 4.
Save current active settings in RAM to user profile 5.
Save current active settings in RAM to user profile 6.
Save current active settings in RAM to user profile 7.
Save current active settings in RAM to user profile 8.
Save current active settings in RAM to user profile E.
Function & Description
Set the Secondary Dial Number for Async to Sync Multi-link PPP Mode.
Display current configuration
Store phone number n as x
index number 0, 1, 2....
saved phone number
Appendix D: Using AT Commands
239