Step 11 Before Lighting The Fireplace; Step 12 Lighting The Fireplace; Step 13 Heating Control; After The Installation - Heat-N-Glo 7000XLT Installer's Manual

Step 11. Before Lighting the Fireplace
Installers Guide
Step 12. Lighting the Fireplace
!
Step 13. Heating Control
These models are equipped with a baffle which will
allow you to control usable heat output. The baffle
control lever is located at the lower left corner of the
unit behind the lower grille. See Figure 32.
FOR LESS HEAT: Push the baffle lever back and up
to lock. This will open the baffle.
FOR MORE HEAT: Pull the baffle lever forward and
down. This will close the baffle.

After the Installation

!
30