Input Panel; Cable Connection; Communication Protocol - NEC UM351W Installation Manual
Hide thumbs
Also See for UM351W:
- User manual (152 pages) ,
- Quick setup manual (2 pages) ,
- Quick setup manual (6 pages)
Table of Contents
Advertisement
UM361X, UM351W & UM352W Installation Guide
Desktop and Ceiling Mount
Input Panel
Control Codes
Note: Contact your NEC rep for codes not listed.
Cable Connection
Communication Protocol:
Baud Rate:
38400 bps
Data Length:
8 bits
Parity:
No Parity
Stop Bit:
One bit
X on/off:
None
Communications: Full duplex
NOTE 1: It is recommended to set the projector to "Idle Mode" in the Setup menu for best Power ON response.
NOTE 2: Pins 2, 3, 5, 6 and 8 are used inside the projector.
NOTE 3: For long cable runs it is recommended to set communication speed in the Setup menu to 9600 bps.
www.necdisplay.com
NEC Display Solutions of America, Inc.
To TxD of PC
To RxD of PC
To GND of PC
1
2
3
4
5
6 7
8
9
To RTS of PC
To CTS of PC
UM361X, UM351W, UM352W
v1.0
Page 8 of 8
Advertisement
Table of Contents
