GLOBAL ASSISTIVE DEVICES VibraLITE 2 Instruction Manual page 6

2. Press & Hold the LAP/RESET button until the hour digits BLINK.
Press the START/STOP button to rotate to the hour wanted.
Note: In the 12 Hr Mode, remember to use the PM indicator for
correct setting.
3. Press the MODE button to go to the minutes. The minutes will
BLINK. Press the START/STOP button to rotate to the minute
wanted.
4. Press LAP/RESET Button when finished. The display will stop
blinking. The set icon will show on the display. Your alarm is set.
When A1 Alarm is set the icon shows beside the PM indicator
under the Alm1.
When A2 Alarm is set the icon shows on the
display beside the A1 icon under the Alm2 icon.
Note: Calendar Clock Timer must be set for Alarm
Time activation to be correct.