Front Panel Controls And Functions - Samson Graphite MD13 Quick Start Manual

Usb midi controller

Hide thumbs Also See for Graphite MD13:

Table of Contents

Available languages

Graphite MD13 · USB Pad Controller

Front Panel Controls and Functions

Trigger Pads - The 13 backlit velocity-sensitive trigger pads with aftertouch can

send MIDI note, velocity, and aftertouch messages or when the CC button is

pressed send control change information. The setting of the Trigger Pads note and

control change information can be set using the computer editor, as either toggle or

momentary style buttons.

Assignable Knobs - The six knobs send continuous control change data. You can set

up to 30 different parameters using the five presets.

Transport Buttons - The transport buttons control stop, play, and record. They can

also be assigned to control different parameters using the computer editor. The

Play/Record button sends the primary (PLAY) message when pressed. Press the

SHIFT to send the secondary (RECORD) message.

OCTAVE +/– Buttons - Press the OCTAVE buttons to shift the octave of the trigger

pads up or down a maximum of four octaves, to extend the range of the controller.

Each time you press the OCTAVE button, the range of the pads shifts up or down

12 notes. The buttons blink progressively faster as the keyboard's octave shifts in

each direction. Press both buttons to set the pads to the default range.

Master Encoder - This continuous encoder sends continuous control data.

Crossfader - This assignable fader sends continuous control data to your DAW.

Table of Contents