Troubleshooting - Geemarc Ampli550 User Manual

TROUBLESHOOTING

No dial tone
• Check that all phone cord connections are securely
plugged into the telephone & wall jack.
• Check that the phone is in the correct dialing mode, tone or
pulse.
• Plug another phone into the wall jack to make sure your
phone service is working properly.
No audible ringer
• Make sure the ringer is not turned off.
• Check the volume level of the ringer.
• You may have too many extensions on your line. Try
unplugging a few devices.
No amplification
• Check to see if the Amplify key is "On". The red light
should be lit. Also check power supply connections.
Noise, Static, Interference while using the handset
• A filter may be required for homes with a DSL line or near
Radio towers.
Caller ID information does not show
• Make sure you are subscribed to Caller ID through your
local company.
32