Table of Contents
Advertisement
No
Icon
Description
CONFIRM/UNLOCK
If screen and buttons are unlocked, press it to
upload setting parameters after setting any
parameter:
● If press it within 10sec, setting parameters will be
uploaded to unit;
● If press it beyond 10sec, please resetting all
parameters.
If screen and buttons are locked, press it for 3s to
unlock them.
DISINFECT
Manually turn on disinfect function
Icon
Confirm manually activate disinfection
function , then the unit will heat up water to
65
Disinfect Clock Setting
Press button
disinfect clock setting. Then icon
flash, and icon
and the hour value of clock will flash slowly.
Set the hour value of clock.
Confirm the hour setting. Then the minute
value of clock will flash slowly.
Set the minute value of clock.
Confirm the disinfect clock setting and
quit out.
Unit will automatically start disinfect function at the
above-set clock every 7 days.
If user don't set disinfect clock, unit will automatically
start disinfect function at 23:00 every 7 days.
If unit is OFF or under disinfect mode, press
will lead to show
VACATION
Vacation Setting
Enter vacation setting. Icon
flash. Icon
will show last setting vacation days.
Set vacation days. The days range is 1~99
days(default as 14 days).
Confirm vacation setting and quit out. The
unit will immediately go into vacation.
will flash.
at least for disinfection.
for 3sec to enter
will
will be lightened
on the display.
will
will be lightened.
No
Icon
Description
In vacation period, the setting target water
temperature is 15
the remanent vacation days. On the last day of
vacation, unit will automatically start disinfect
function, and automatically reset the target
temperature to the last one before vacation.
If unit has already been in vacation or OFF, press
will lead to show invalid icon
display.
5.3 Combination button
No.
Icon
+
Clear error
code
+
Query
5.4 Auto-restart
If electricity power failed, unit can memorize all setting parameters,
unit will be back to the previous setting when power recover.
5.5 Button Auto Lock
When there is no operation of button for 1 minute, button will be
locked except Unlock button
buttons.
5.6 Screen Auto Lock
If there is no operation of button for 30s, screen will be locked
(extinguished) except for error code and alarm light. Press any button
will unlock the screen(lighten)
as default and
will show
on the
Description
Press the two buttons at
the same time to clear all
stored error & protect
codes, and the buzzer
will buzz one time.
Press the two buttons at
the same time for 1sec to
go into querying. On
querying user can check
unit setting & running
parameters by pressing
circularly.
Press button
for
1s or no button operation
for 30s, then quit
querying.
, Press
) for 3s, unlock
Installation & Owner's Manual
15
Advertisement
Table of Contents
