Advanced Settings - Legend LE3233 User Manual

PC Menu Adjustments
In the Setup menu you may adjust the position of images displayed on screen once you connect an input signal from
your PC. The recommended resolution is
computer's user manual on instruction for proper display output. If your PC system uses a standard signal mode, the
TV screen will adjust automatically. Connect an optional 3.5mm audio cable for stereo sound. See page
How to Navigate:
After connecting to a PC, press the INPUT button on the remote control, Use the
and press ENTER. Press the MENU button on the remote control and navigate using arrow
Setup.
• Gain access to position adjustment
options by pressing the down
button to highlight PC Settings, then
press arrow button to select from
the following options.
Menu Language
Transparent
OSD Timeout
Closed Caption
Input Label
PC Settings
Other Settings
Restore Default
Select Move
• Highlight Clock. Navigate
using the arrow buttons to
control the width of the image.
H-POS
V-POS
Clock
Phase
Auto
Select Move
19"1366X768 / 24"1920X1080
• Highlight H-Pos. Navigate
arrow using the
adjust the position of images
displayed from side to side.
English H-POS
25% V-POS
30Sec.
Clock
Phase
Auto
Exit
• Highlight Phase. Navigate
using the
improve focus and image stability.
50 H-POS
V-POS
27
50 Clock
98 Phase
Auto
Exit

Advanced Settings

arrow buttons to
Select Move Exit
arrow buttons to
Select Move Exit
25
. For use with a laptop computer, refer to your
buttons to highlight the PC input
• Highlight V-Pos. Navigate
using the
adjust the position of images
displayed up and down.
50 H-POS
V-POS
27
50 Clock
98 Phase
Auto
Select
• Highlight Auto. Press the
arrow button to automatically adjust
the display to the best setting.
50 H-POS
V-POS
27
50 Clock
Phase
98
Auto
Select
16 for details.
buttons to select
arrow buttons to
50
27
50
98
Move Exit
50
27
50
98
Move Exit