Tv Channel Setup & Channel Auto Scan - Legend LE3233 User Manual

TV Setup
Select antenna options and perform Channel Auto Scan to receive television channels that will be stored into the TV
tuner memory.
To enter TV Mode:
•
Press the MENU button
•
Using the arrow buttons; scroll to highlight
•
Press the down arrow button to highlight Air / Cable
Select Cable if you subscribe to a pay television service without a set top box.
•
Press the arrow button to highlight Cable.
•
Press the arrow button to select Auto Scan. Press ENTER and Cable System will be displayed next.
NOTE: Channel Auto Scan may take several minutes to complete.
Cable Mode
Next
Channel List
Show/Hide
Channel Number
Channel Label
Select Air when TV is connected to an indoor / outdoor antenna.
•
Press the arrow button to highlight Air.
•
Press the arrow button to select Auto Scan. Press the
NOTE: Channel Auto Scan may take several minutes to complete.
Air Mode
Next
Channel List
Show/Hide
Channel Number
Channel Label
NOTE: For cable or satellite
Users without an indoor / outdoor TV antenna, there is no need to run Channel Auto Scan. Connect your cable or satel-
lite set top box to one of the available inputs on the TV for viewing.
5-2
KSTP-SD
5-2
KSTP-SD
TV Channel Setup &
Channel Auto Scan
Channel mode
Next
right arrow button twice to start Channel Auto Scan.
Next
19
Total Found
Total Found