Table of Contents
Advertisement
Advanced Operation
GUARD MODE
1) you can tell robopet ™ to guard his environment by pressing the
guard mode button
the command and then sit down.
2) in guard mode, robopet ™ will use his sound sensor and infrared
vision sensors to react to movement and sound nearby.
3) when he detects a disturbance robopet™ will react by standing
up and making a lot of noise. after this display he will sit down
again and continue to guard.
4) guard mode lasts 30 minutes before robopet ™ puts himself into
sleep mode.
5) you can end guard mode at any time by pressing the guard mode
button again. if robopet ™ was disturbed he will let you know with
a sequence of growls and pants. if he was not disturbed he will
simply stand up.
SLEEP MODE
1) sleep mode allows robopet ™ to power down and still keep his
training and programming in memory.
2) press and hold stop / sleep for about 5 seconds to enter sleep
mode. robopet ™ will sit down and make a noise.
3) in sleep mode, robopet ™ will not respond to any controller
buttons apart from the wake up command.
4) to wake robopet ™ up, press and hold the stop / sleep button for
about 5 seconds.
5) If Robopet™ does not receive any commands for about 10 minutes,
he will enter Sleep Mode (a battery saving shut-down function).
. Robopet ™ will make a sound to confirm
9
Hide quick links:
Advertisement
Table of Contents
