Asus AiCam Quick Start Manual page 7

3. Mark two holes on the wall.
4. Align your AiCam assembly to the holes on the wall.
5. Insert and tighten the two bundled drywall anchor kit with screws
into the holes on the wall to secure your AiCam in place.
6. Connect the power adapter to the micro USB port of your AiCam and
plug it to a power source.
7. Adjust your AiCam to these recommended angles: 45, 90, or 135
degree angle.
NOTES:
• Bending the wall mount bracket to 180 degree angle may shorten its usage
life.
• You can also directly mount your AiCam to the wall without attaching it the
wall mount bracket.
• You can use the bundled attachable clip to attach your AiCam on a railing
or cot.
Q9846_AiCamera.indb 7
7
2014/12/3 13:41:56