Once you have placed your speaker in your listening room and have downloaded the HEOS app, you are ready to configure your speaker for music playback.
This involves following a few simple steps to get the speaker connected to your existing home network:
WARNING
DO NOT connect the Ethernet cable if you are connecting your speaker to a wireless network. If you are connecting the speaker to a wired network, use an Ethernet cable to connect
the speaker to your network or router.
1
Make sure your mobile device is connected to your
wireless network (the same network you want your
speakers connected to). You can check this in the
Settings – Wi-Fi menu of your iOS or Android device.
NOTE
If your wireless network is secure, make sure you know the password to join
your network.
2
Make sure you have the included
audio cable handy.
3
Launch the HEOS app on your
mobile device.
Setup
Use
Troubleshooting
4
Tap the "Setup Now" button at the top of the screen.
5
Follow the instructions to add the speaker to your
wireless network. (The Wi-Fi settings from your mobile
device will be copied to the speaker via the audio cable.)
NOTE
If you have any problems connecting your speaker, jump to the Troubleshooting section