Sony BDV-N9100W Operating Instructions Manual page 71

Z_ appears without a nymessages o n
theentireTVscreen.
---4 Contact your nearest Sony dealer or
local authorized Sony service facility.
"NOT.USE" a ppears inthetoppanel
display whenyoupressSOUND
MODE,FOOTBALL or MUSIC EQ.
---4 The setting for SOUND MODE,
FOOTBALL and MUSIC EQ cannot
be changed when the [Sound Effect] is
set to other than [Sound Mode On]. Set
[Sound Effect] in [Audio Settings] to
[Sound Mode On] (page 62).
Thereisnopicture or the pictureis
notoutputcorrectly.
---4 Check the output method on your
system (page 24).
Touch and hold I_ and VOL - on the
main unit for more than 5 seconds to
reset the video output resolution to the
lowest resolution.
For BD-ROMs, check the [BD-ROM
24p Output] settings ill [Screen
Settings] (page 60).
Thereisnopicturewhen youmakean
HDIVII cableconnection.
The main unit is connected to an input
device that is not HDCP (High-
bandwidth Digital Content Protection)
compliant ("HDM[" in the top panel
does not light up) (page 24).
3D images fromthe HDIVII (IN 1) or
HDIVII (IN2) jackdonotappear on the
TVscreen.
Depending on the TV or video
equipment, 3D images may not appear.
Thedarkareaofthe pictureistoo
dark/the brightareaistoobrightor
unnatural.
---4 Set [Picture Quality Mode] to [Auto]
(default) (page 44).
Picturenoiseappears.
Clean the disc.
---4 ff the picture output from your system
goes through your VCR to get to your
TV, the copy-protection signal applied
to some BD/DVD programs could
affect picture quality, ff you still
experience problems even when you
connect your main unit directly to your
TV, try connecting your main unit to
the other input jacks.
An imageis notdisplayed on the
entireTVscreen.
Check the setting of [TV Type] in
[Screen Settings] (page 60).
The aspect ratio on the disc is fixed.
Colorirregularity occurs ontheTV
screen.
[f the speakers are used with a CRT-
based TV or projector, install the
speakers at least 0.3 meters (1 foot)
from the TV set.
If the color irregularity persists, turn
off the TV set once, then turn it on after
15 to 30 minutes.
Make sure that no magnetic object
(magnetic latch on a TV stand, health
care device, toy, etc.) is placed near the
speakers.
Thereis no sound.
The speaker cords are not connected
securely.
Check the speaker settings (page 51 ).
O
-1
3
o
-1
71 us