Sony BDV-N9100W Operating Instructions Manual page 62

• [Attenuate - AUDIO]
Distortion may occur when you listen to an
equipment connected to the AUDIO
(AUDIO IN L/R) jacks. You can prevent
distortion by attenuating the input level on
the main unit.
[On]: Attenuates the input level. The output
level will decrease at this setting.
[Off]: Normal input level.
• [Audio Output]
You can select the output method where the
audio signal is output.
[Speaker]: Outputs multi-channel sound
from the system's speakers only.
[Speaker + HDM[]: Outputs multi-channel
sound from the system's speakers and
2-channel linear PCM signals from the
HDM[ (OUT) jack.
[HDM[I: Outputs sound from the HDM[
(OUT)jack only. Sound format depends on
the connected equipment.
• When [Control ff_r HDMI] is set to [On]
(page 64), [Audio Output] is set to [Speaker +
HDMI] automatically and this setting cannot be
changed.
• When [Audio Ouqmt] is set to [HDMI], the
output signal format lor the "TV" function is
2-channel linear PCM.
• [Sound Effect]
You can turn on or off the system's sound
effects (SOUND MODE setting (page 33)).
For a 2-channel source, you can select
[Dolby Pro Logic], [DTS Neo:6 Cinema],
or [DTS Neo:6 Music] to simulate surround
sound.
[Sound Mode On]: Enables the surround
effect of the sound mode (page 33) and
Football mode (page 34).
[Dolby Pro Logic]: The system simulates
surround sound from 2-channel sources
and outputs sound from all speakers
(5.1 channel) (Dolby Pro Logic decoding).
[DTS Neo:6 Cinema]/[DTS Neo:6 Music]:
The system simulates surround sound from
2-channel sources and produces multi-
channel sound (DTS Neo:6 Cinema/DTS
Neo:6 Music mode decoding).
[2ch Stereo]: This system outputs the sound
from the front left/right speakers and
subwoofer only. Multi-channel surround
formats are downmixed to 2-channel.
[Off]: The sound effects are disabled. You
can hear sound as it is recorded.
• [Speaker Settings]
To obtain optimum surround sound, set the
speakers. For details, see "Setting the
Speakers" (page 51 ).
• [Auto Calibration]
You can calibrate the appropriate settings
automatically. For details, see "Calibrating
the Appropriate Speaker Settings
Automatically" (page 50).
• [Bluetooth AUDIO - AAC]
You can enable and disable AAC audio.
[On]: AAC audio if the Bluetooth device
supports AAC.
[Off]: SBC audio.
You can enjoy high quality sound if the AAC is
enabled. In case you cannot listen to AAC sound
frnm your device, select [Off].
62us