Battery & Led Status - Pidion BM-150R series Manual

Hide thumbs Also See for BM-150R series:
Table of Contents

Advertisement

6
Battery & LED status
[ Hours for Charging & Use ]
Charge on a connection
from the USB
Charge on a connection
to the Adapter
Maximum hours of use
when charged
[ Battery Charge LED]
While Charging
After Charging
[ Radio Function LED ]
Division
WLAN
In Use
Blue
Standby
-
Searching
If the battery is running low on power, a warning notice may appear on the monitor with a warning sound.
Charging and usage hours may differ from that of the manual, according to the user's application environment.
New batteries are not charged, therefore you must fully charge the battery before use.
Approximately 4 hours
Approximately 2 hours
Standby: 15 hours
Phone call: 5 hours 30 minutes
Red
Green
Bluetooth
Phone
Blue
Amber
-
Slowly Blink
-
Quickly Blink
[ Safety Notice for Using the Battery ]
Batteries are expendable products and with regular use over time
they will lose there ability to fully charge.
The battery may overheat from its application environment.
If the fully charged battery lasts only half the time from its
originally purchased state, you should purchase a new battery.
(Batteries have a 6 month period guarantee.)
The time that a battery may last may differ according to the
lighting of the monitor, temperature, length of its use, etc.
Battery exhaustion may be considerably faster in areas
where Bluetooth, wireless Internet, or phones cannot be used.
(Bluetooth, wireless Internet, and phone functions should be
turned off when these functions are not in use. This will help save
the battery.)
Leaving the battery on the re-charger after it has been recharged,
will not damage the battery.
If the cables to the main body are not properly connected, the
lights on the main body may not come on during the recharging
process. Always check and make sure that all cables are connected
properly.
Do not remove the battery while it is in use. This may result in
damage of data and the PDA may be initialized.
If the battery is not sufficiently charged, the PDA may turn off
while in use. Always check and make sure that the battery your
using has been sufficiently charged.
BM-150R
11

Advertisement

Table of Contents
loading

Table of Contents