Oregon Scientific RM329P User Manual page 6

To change the "weekday" display to the "seconds" display:
• When the weekday is displayed, press CLOCK once.
CALENDAR AND ALARM TIME DISPLAY
The calendar and the alarm-time share the same section of the
display.
The calendar is displayed in a day-month format.
calendar mode
alarm mode
To change the calendar display to the alarm-time display:
• When the calendar is displayed, press ALARM once.
To change the alarm-time display to the calendar display:
• When the alarm time is displayed, press CLOCK once.
HOW TO SET THE CALENDAR
CLOCK MANUALLY
If the RM329P is taken outside of the range of Frankfurt DCF77
radio signal it will need to be manually set.
To manually set the clock:
1. When the calendar is displayed, press CLOCK for two seconds.
The month value will start to blink.
2. Enter the month using the [
either button to rapidly increase or decrease the value.
3. Press CLOCK to confirm and proceed to set the day, language,
day-of-the week, hour and minute.
4. For the display language, you can choose between (E) for
English, (D) for German, (F) for French (I) for Italian and (S) for
Spanish (see language chart above).
5. When finished, press CLOCK to return to normal display. If
changes are made during the process, the seconds will reset and
start from zero.
Note: The Clock is in 24-hour display format.
HOW TO SET AND ACTIVATE
THE ALARM
To set the alarm time:
1. Press and hold ALARM for two seconds when the alarm time is
displayed.
6
] or [ ] buttons. Hold down