Audio Setup Page; Video Setup Page; Hdmi Setup Page - VIETA VH-MS350SL User Manual

Audio Setup Page

Downmix (Analog Audio)
LT/RT
5.1 channel audio is mixed into left channel and right
channel and is output via FL and FR speakers re-
spectively.
Stereo
5.1 channel audio is mixed into stereo signal and is
output via the FL and FR speakers.
Off
Select this to make this function invalid.
Note:
Only for Dolby AC-3 encoded 5.1- channel discs.
Reverb Mode (3D Processing)
This setting provides following sound effects:
Off, Concert, Living Room, Hall, Bathroom, Cave,
Arena, Church

Video Setup Page

Notes:
Component setup and quality setup is invalid until
HDMI is setted to off.
CVBS
If the component connection is used, select this option.
YUV
Set the video output according to the video connec-
tion.
RGB
If the composite connection is used, select this option.
Color Setting
You can adjust some parameters of video picture.
1 Highlight "Color Setting" and press the
2 Use the / buttons to select the parameter.
 
Sharpness
This adjusts the sharpness of the picture shown on
the monitor.
Select High, Medium or Low using the Cursor but-
tons, and press the ENTER button.
Brightness
This adjusts the brightness of the picture.
Use the left and right buttons to change the value,
and press the ENTER button.
Contrast
This adjusts the picture contrast.
Use the left and right buttons to change the value,
and press the ENTER button.
Gamma
This adjusts the gamma value of the picture.
Select High, Medium, Low or None using the Cursor
buttons, and press the ENTER button.
Hue
This adjusts the green/red balance of the picture (only
for progressive-scan and S-Video output).
Use the left and right buttons to change the value,
and press the ENTER button.
Saturation
This adjusts the saturation level.
Use the left and right buttons to change the value,
and press the ENTER button.
3 Press left button (
Page.
HDMI Setup
HDMI
On
Select this to have the signal output when your
TV or monitor is connected to the HDMI out
terminal.
Off
Select this when you do not use the HDMI out
terminal.
No signal is output from the HDMI out terminal.
AUDIO FORMAT
AUTO
Detect and select the best supported audio format
automatically
PCM
Multi-channel audio format will be down-mixed to two
channel sound.
RESOLUTION
T h e r e s o l u t i o n o p t i o n s i n c l u d e 4 8 0 p ( 6 0 H z ) ,
720p(60Hz), 1080i(60Hz), 1080p(60Hz), 576p(50Hz),
button.

720p(50Hz), 1080i(50Hz) and 1080p(50Hz).
CEC SETUP
HDMI-CEC:
You can use one single remote control to control all
HDMI CEC devices that connected via HDMI connec-
tion.
On
Enable HDMI-CEC feature
Off
Disable HDMI-CEC feature
One Touch Play:
When you press POWER button on RC to turn on
this player, the TV (if the TV supports one-touch play)
automatically turns on and switches to the video-
in channel. Disc play starts if there is a disc in this
player.
On
Enable one touch play feature
) to return to the Video Setup

35