Preference Setup Page - VIETA VH-MS350SL User Manual

Off
Disable one touch play feature
One Touch Standby
When you press and hold POWER button on RC, all
the connected HDMI CEC devices (if the device sup-
ports one-touch standby) switch to standby mode.
On
Enable one touch standby feature
Off
Disable one touch standby feature
Note:
If no display appears on the TV screen due to unsup-
ported resolution, reconnect any available interlace
video output to your display and re-adjust the resolu-
tion settings to 480p/576p.

Preference Setup Page

Notes:
You can't set TV type until HDMI is setted to off.
TV Type
Pal
Select this when the unit is connected to a PAL TV.
Auto
Select this when the unit is connected to a Multi TV.
Ntsc
Select this when the unit is connected to an NTSC TV.
PBC
Turn on or off the content menu of VCD/SVCD with PBC
(playback control) feature.
On
Display index menu when you load a disc for
playback.
Off
Skip the menu and start play from the first title.
Audio, Subtitle, Disc Menu
You can select a preferred language for audio, subtitle
and disc menu.
When you select a preferred language that is not

recorded on the DVD, one of the recorded
languages is automatically selected.
You can override the Audio setting in the Setup

menu by pressing the AUDIO button on the remote
control unit while a DVD disc is playing.
You can override the Subtitle setting in the Setup

menu by pressing the SUBTITLE button on the
remote control while a DVD disc is playing.
Select Off to turn subtitles off. Note that subtitles on

some discs cannot be removed even when you
select Off.
Parental
36
Playback of some DVD discs can be limited depending
on the age of the users. The parental control system
allows the playback limitation level to be set by the
parent.
Note:
The lower the level, the stricter the limitation.

If the rating of the loaded DVD disc is higher than

the level you set, the system will requirea password.
Enter your password and press the ENTER button
to start playback.
1 Select the desired parental control level from the
menu, then press ENTER button.
2 You will be prompted to enter your password.
Use the 0-9 buttons to enter 000000 (or your
privacy password if already established).
No need to enter a password if "Password Mode"

is set to OFF.
Password
Password Mode
You can temporarily unlock discs for playback accord-
ing to the level.
To change this setting, select On or Off, enter your
password, and press the ENTER button.
On
You need a password to change the level of pa-
rental control.
Off
You can change the level of parental control with-
out a password. You cannot temporarily unlock
discs for playback.
You can set a new password for parental control.
The default password is 000000.
1 Select "Change" and press the ENTER button.
2 Enter 000000 (or your privacy password) using
the 0-9 buttons.
3 Enter a new password.
4 Enter the same password again to confirm.
5 Press ENTER button.
Note:
you will need your password to change the level of
control in the future as well as to temporarily unlock
discs for playback.
If you forget your password, use 000000.
Default
All the items in the Setup menu (except for the pass-
word and parental control) will be reset to the default
settings.
DVD Microsystem