Bowers & Wilkins A7 Owner's Manual page 7

8. A7 Factory Reset
A7 has a pin-hole reset button located on its rear
connection panel. The reset button is illustrated in
Diagram 6. To return the A7 network settings (AirPlay
input) to the factory defaults, ensure the power cable
is connected, and power the A7 on. Press and hold
the reset button for 2 seconds. The indicator will
flash red twice.
9. Cleaning A7
Use a clothes brush or damp cloth to clean the
grille cloth. Wipe other surfaces with a clean lint-free
cloth. If you wish to use a cleaning agent, apply it
onto the cleaning cloth, not directly onto A7. Test
a small area first, as some cleaning products may
damage some of the surfaces. Avoid products that
are abrasive, or contain acid, alkali or anti-bacterial
agents.
10. Troubleshooting
If you need help troubleshooting a specific problem,
or have a question you'd like answered, please
consult A7's support section of the Bowers & Wilkins
website www.bowers-wilkins.com.
Diagram 6
A7 factory reset
7