Advertisement
SETUP GUIDE
COMPUTER SETUP
YOUR COMPUTERS SETTINGS
Setting up your computer to work with the
iConnex is a simple task as the iConnex
needs no driver or program to work, Simply
connect the USB cable from your desktop
computer or Laptop Computer to the iConnex,
and should be ready to go. If you have a
desktop computer Please make sure that
you connect the iConnex to a USB port on
the back of your computer as it may not
work with the USB input located on the front.
If you wish to check and make sure that the
settings are correct, go to your START
menu then your choose CONTROL panel.
Look for the SOUND control panel, choose
it, a dialogue box will pop up. Check and
make sure that the USB codec is chosen on
both the INPUT and the OUTPUT tabs.
After all your connections and settings are
in order you are now ready to install the
Audacity recording software that came
include inwith your iConnex soundcard.
INSTALLING AND SETTING UP AUDACITY
Audacity is the software that is bundled with
the iConnex and allows you to record your old
RECORDS or TAPES, although we do not
manufacture the AUDACITY software we
have included it along with your iConnex as a
courtesy and convenience to our customers.
To install AUDACITY insert the disk into your
computers CD-ROM drive, go to your start
menu and open MY COMPUTER and choose
the AUDACITY CD. Open the AUDACITY
folder and choose SETUP this opens the
install wizard, follow the prompts and the
wizard will install AUDACITY and create an
ICON on your desktop. when the install
wizard finishes, look for the AUDACITY icon
on your desktop and click it this will open
AUDACITY.
Choose Start menu
then Control panel to
set audio
AUDACITY is a freeware program and has no relation to
NOTICE!
iKey audio, any and all customer service issues should be
directed to AUDACITY at audacity.sourceforge.net.
Check the Sound
control panel to make
sure that the input
and outputs are set
to USB codec.
Advertisement
