Advertisement
Quick Links
Advertisement
Summary of Contents for iKEY-AUDIO iCONNEX
- Page 1 QUICK SETUP GUIDE SETUP FOR ICONNEX SOUNDCARD AND AUDACITY RECORDING SOFTWARE...
-
Page 2: Computer Hook Up
SETUP GUIDE Congratulations on your purchase of the iKey Audio iConnex soundcard. This guide will help you setup the iConnex soundcard as well as the included Audacity software. Please take the time to carefully read through this guide as it will help you better understand how to use your new iConnex soundcard. - Page 3 AUX input. Then use the built in THUMB WHEEL volume control located on Use the built in VOLUME the side of the iConnex to adjust the volume THUMB WHEEL of the iConnex output. to adjust the output volume...
-
Page 4: Computer Setup
If you have a desktop computer Please make sure that you connect the iConnex to a USB port on the back of your computer as it may not work with the USB input located on the front. -
Page 5: Quality Tab
The Audio I/O tab is where you choose how AUDACITY sends and receives audio for most computers this is automaticaly set once you plug in the iConnex sound card. AUDIO I/O These settings are as follows: “Playback” Determines which output Audacity will play out of. -
Page 6: File Formats
”FILE” pull down menu, choose the drive you wish to save the file to and press OK. Repeat this process for every new recording. You are now ready to use the iConnex to transfer all of your records and tapes!