Table of Contents
Advertisement
Assembly and Use for the 1L Bowl
ASSEMBLY
Shaft
Or
Fig. 6
Fig. 7
It's best to add the liquid ingredients first and then the dry ingredients.
IMPORTANT: Make sure that the motor base is plugged
in for use.
1
Place the motor base on a clean, dry, level surface such
as a counter or table top.
2
Align and lower the bowl onto the motor base.
(Fig. 6) Handle should be aligned slightly to the left of
the "LOCK" symbol on the motor base.
3
Rotate the container to the left as far as it will go to lock
in place. (Fig. 6)
4
Holding the desired attachment by the shaft, place it
onto the drive gear inside the container. Ensure that the
attachment is seated properly and is standing upright.
(Fig. 7)
NOTE: The blade will fit loosely on the drive gear.
5
Add the ingredients to the bowl, making sure that they
do not exceed the highest measured marking line on the
side of the bowl.
6
Holding the lid by the handle in the upright position,
place it on top of the bowl aligning the arrow ( ) located
on the lid with the arrow ( ) located on the bowl's
handle. (Fig. 8)
9
0800 862 0453
PULSE
Fig. 8
Fig. 9
Fig. 10
7
Push down on the "PULSE" on the handle to start the
appliance. (Fig. 9)
NOTE: Pulse ingredients for even chopping by pressing
down in short intervals.
IMPORTANT: When using the dough blade or cookie
paddle hold the appliance to secure the appliance to the
counter or table top.
8
When you have reached your desired consistency, stop
pressing the lid handle and wait for the attachment to
stop turning.
9
To remove the lid, pull the lid handle up to a 90° angle.
Turn the bowl anti-clockwise to lift off the base.
(Fig. 10, Fig. 11)
CAUTION: Never insert your hands in the bowl as the
blades are sharp. Always use a spatula to dislodge food
that has stuck to the sides of the bowl.
10 Make sure that the unit is unplugged when not in use.
REMOVAL
Fig. 11
Advertisement
Table of Contents
