Advanced Operation; Setting The Option Menu For Each Input Source; Option Menu Items - Yamaha R-S201 Owner's Manual

ADVANCED OPERATION

SETTING THE OPTION MENU FOR EACH INPUT SOURCE

The Option menu allows you to configure various settings for each input source and recall those settings automatically
when an input source is selected.
Input selector
buttons
B / C / D
ENTER
MENU

Option menu items

Available menu items vary depending on the selected input source.
Menu item
MAX VOL
INITIAL VOLUME (INIT VOL)
TUNER STEP (TUNER STP)
Only for Asia and General models
FM MODE
AUTO PRESET (A, PREST)
CLEAR PRESET (C, PREST)
CLEAR ALL PRESET (C,A, PREST)
AUTO POWER STANDBY
(AUTO STBY)
y
The default settings are marked with "*".
1
Press one of the Input selector buttons to
select the desired input source.
2
Press MENU.
3
Press B / C to select the desired menu item,
and then press ENTER.
4
Press B / C to change the settings.
y
• For certain menu items, you must press ENTER to save
• To return to the screen where you can select menu items,
5
To exit the Option menu, press MENU.
Sets the maximum volume level so that the volume will not be accidentally increased above a
certain level.
Adjustable range: 01 to 99, MAX*
Sets the volume at the time this unit is turned on. When this parameter is set to "OFF", the
volume level used when this unit was set to standby is applied.
Adjustable range: OFF*, MUTE, 01 to 99, MAX
Sets tuner frequency step.
Choices: AM10/FM100, AM9/FM50*
Changes the FM radio wave reception mode (see page 14).
Choices: STEREO*, MONO
Automatically detects FM radio stations and registers them as preset stations (see page 14).
Clears a selected preset station (see page 16).
Clears all preset stations (see page 17).
Sets this unit to standby mode automatically if no operation is performed in the specified time.
Choices: OFF/2H/4H/8H*/12H
the new setting.
press D.
Description
19
En