Cleaning And Caring For Breathe Easy - Dometic Breathe Easy Installation And Operating Manual

_BreatheEasy_A5.book Seite 27 Dienstag, 24. Januar 2012 3:31 15
Breathe Easy™
10 Cleaning and caring for
Breathe Easy™
CAUTION!
!
Always disconnect the plug before you clean and service
the device.
CAUTION! Beware of burns
!
Let the ultraviolet lamp cool down before cleaning.
NOTICE!
A
 Never clean the device under running water or in dish water.
 Do not use abrasive cleaning agents or hard objects during
cleaning as these can damage the device.
➤ Wipe the exterior of the device occasionally with a soft, dry cloth.
➤ Pay special attention to dirt and dust in the air vents.
➤ Clean the interior with canned air to blow out any dust.
➤ Clean the fan (fig. 1 1, page 3) with a soft brush when you replace the
ultraviolet lamp or if you notice a reduction in the air flow.
➤ Clean the removable nano-mesh divider (fig. 1 2, page 3) if you notice a
reduction in the air flow.
To do this, lift it out of the slots and clean it with a soft brush or with water
and detergent.
Let it dry, then slide it back in the slots.
➤ Clean the non-removable nano-mesh strips (fig. 1 4, page 3) with a soft
brush.
➤ If necessary, clean the ultraviolet lamp with a soft cloth and alcohol.
EN

Cleaning and caring for Breathe Easy™

27