4. In the Recovery Drive window, follow the on-screen instructions to create a recovery USB drive.
Using the recovery USB drive
If you cannot start your tablet, refer to "Frequently asked questions" on page 11. If you still cannot start your
tablet, use the recovery USB drive to recover your tablet.
To use a recovery USB drive, do the following:
Note: Ensure that your tablet is connected to ac power during the following process.
1. Connect the recovery USB drive to the tablet.
2. Open the ThinkPad Tablet Setup program. See "ThinkPad Tablet Setup" on page 83.
3. Tap Startup. In the Boot submenu, drag the recovery drive to the first place to select it as the boot
device.
4. Save configuration changes and restart the tablet.
5. Select a corresponding recovery solution according to your situation. Then follow the instructions on
the screen to complete the process.
.
Chapter 9
Recovery overview
103