MP3/WMA/AAC
MP3, WMA or AAC is not played back.
• Writing error occurred. The MP3/WMA/AAC format
is not compatible.
– Make sure the MP3/WMA/AAC has been written
in a supported format. Refer to "About MP3/
WMA/AAC" on page 42, then rewrite in the format
supported by this device.
Audio
The sound is not output from the speakers.
• There is no signal output from the internal amplifier.
– Power IC is switched to "ON".
iPod
iPod does not play and no sound is output.
• The iPod has not been recognized.
– Reset this unit and the iPod. Refer to "Initial System
Start-Up" on page 22. To reset the iPod, refer to the
Owner's Manual of the iPod.
CD Player Messages
No Disc
• No CD is inserted.
– Insert a CD.
• Although a disc is inserted, "No Disc" is displayed
and the unit does not start to play or eject the disc.
– Remove the disc by following these steps:
Press the
button again for at least 2 seconds.
If the disc still does not eject, consult your Alpine dealer.
ADDITIONAL INFORMATION 189
10