Network Critical PT100 User Manual page 9

Note: Straight or crossover cables can be used on the MONITOR PORTS as they are
Auto-MDIX (Media Dependent Interface Crossover) capable.
Check the Link/Activity indicators on the monitoring device and the PT
6
monitor ports to the monitoring device(s).
Note: If the PT100 fails to power up, or fails to show activity on all ports, ensure
that the power source is turned on.
I N S T A L L I N G T H E P T 1 0 0 P O R T A B L E TA P
100 to verify that data is flowing out of the
PT100 User Guide
8