Getting Started - Golf Buddy CT2 User Manual

2.1 Power ON / OFF
Press and hold the
2.2 Charging
2.3 Time Setting
The time will set automatically once the CT2 successfully connects to Satellite's via GPS (please
note: you must be outdoors to connect to satellites); however, time zones and daylight savings will
need to be set accordingly. To set the clock manually (from the Time/Date screen), press and hold
the button to bring up the time setting mode. Press the
press the button 4 times to apply the changes.
*Note: The minutes are set automatically upon successful satellite connection and cannot
be manually adjusted.
French Date Format: In time setting mode, press the
Date Format is in English; the secondary option is French. When the blinking
navigate with the /
the changes and return to time mode.

2. GETTING STARTED

button for 3 seconds to power the CT2 ON/OFF
To charge the device, attach the USB clip as
depicted in the images to the left. Align the charger
guide
guide holes on the back
side of the CT2 unit to
clip in place. The battery
indicator will display while
charging as shown in the
image to the right. When
fully charged the battery
i n d i c a t o r w i l l d i s p l a y a s
a f u l l b a t t e r y. To d i s c o n n e c t t h e C T 2 , p i n c h
t h e c h a r g i n g c l i p a n d p u l l a w a y f r o m t h e u n i t .
buttons to select desired selection. Press the
posts with the
or buttons to change the hour, then
button once to edit the Format. The default
/ icon appears,
button three times to apply
4