Mercedes-Benz S-Class 2011 Operator's Manual page 438

Features
436
MB Info call button
X
The stowage compartment under the
armrest ( Y page 423).
X
Press and hold MB info call button : for
more than two seconds.
A call to the Response Center is initiated.
MB info call button indicator lamp :
flashes while the connection is being
established. The
message appears in the multifunction
display. The COMAND display shows the
Information Call Activated
The audio system or COMAND is muted.
If a connection can be established, the
Connected
message appears in the
multifunction display.
The COMAND display shows the
Information Call Activated
If a mobile phone network is available and
there is sufficient GPS reception, the mbrace
system transmits data to the Response
Center, for example:
current location of the vehicle
R
vehicle identification number
R
vehicle model
R
vehicle color
R
i The COMAND display shows that an
mbrace call is active. You can switch to the
navigation menu by pressing the S
button on COMAND during the call. Spoken
commands are not available.
31 USA only.
Connecting Call
message.
Call
message.
A voice connection between the Response
Center and the vehicle occupants is
established. You can obtain information on
how to operate your vehicle's systems, on the
location of the nearest authorized Mercedes-
Benz Center, and on further products and
services offered by Mercedes-Benz USA.
Further details on the mbrace system can be
found under http://www.mbusa.com
Log in under "Owners Online".
i If the indicator lamp in MB info call
button : flashes continuously and no
voice connection to the Response Center
has been established, then the mbrace
system has failed to initiate an MB info call
(e.g. the corresponding mobile phone
network is not available). The
Failed
message appears in the
multifunction display.
The COMAND display shows the
could not be connected!
Press W to confirm the message.
X
To end a call: press the ~ button on the
multifunction steering wheel.
or
X
Press the corresponding button for ending
a phone call on the COMAND telephone
keypad.
Call priority
An emergency call can still be initiated even
if a service call is currently active, e.g. a
Roadside Assistance call or an MB info call.
In this case, an emergency call will take
priority and override all other active calls.
The indicator lamp of the respective button
flashes until the call is ended. An emergency
call can only be terminated by the Response
Center. All other calls can be ended by
pressing the ~ button on the
multifunction steering wheel or the
corresponding button for ending a telephone
call on the COMAND telephone keypad.
31
.
Call
Call
message.