Table of Contents
Advertisement
VCR PRESETTING
The VCR clock setting is made using the remote control unit.
When a single digit number is going to be set, press the O/AV
button first, then the desired number.
(ex.: In case of "9". Press the
O/AV
and then 9.)
Example
To set December 10,1994,9:30.
OPress the CLOCK buttonto activate the clock setting
function.
@Set the date usingthe numericbuttons.
Example: December 10, 1994
Enter 101294
If you entered a wrong number, press the CL button to
erase it, then enter the correct number.
oSet
the time using the numeric buttons.
Example: 9:30
Enter 0930
~Press
the OK button.
Seconds will start counting from "00 as the OK button is
pressed.
~Press
the CLOCK button.
@Each
press of the CHANNEL
(+ or -) button, will advance
or retard the clock by 1 hour.
When
the settings are
completed...
~
Press the OK button.
Seconds will start counting from "00 as the OK button is
pressed.
OPress
the CLOCK button.
Changing
the time
@Each
press of the CL button will erase a digit, then enter the
new setting using the numeric buttons.
Changing the date
OEach press of the CL buttonwill erase a digit,
when all
digits for the time setting have been erased the date will be
displayed.
Continue pressing the
CL
button to erase the digits to
correct, then enter the new settings for the date, then for the
time, using the numeric buttons.
When the changes are completed...
@Press
the OK button.
Seconds will start counting from "00 as the
OK
button is
pressed.
,,r:
,. , ~ {
y::+
I .,>,:,.,+
CLOCK ..,,,:.
11"'
456
5
Advertisement
Table of Contents
