Table of Contents
Advertisement
I
TROUBLESHOOTING
This VCR is highly sophisticated.
It is shipped from the factory after having been checked
and adjusted under the most rigid quality control and inspection system. Should problems
occur, check the following points.
The remote control
I
The batteries are low.
unit doesn't oDerate
.
I
No TV programmed
Are the connections
between your VCR and TV correct?
received
Was tuning correctly preset?
Off the air reception
The video channel setting of the TV receiver does not
on the VCR is poor
correspond to the video channel presetting of the VCR.
Playback
picture
does
The video channel setting of the TV receiver does not
not appear
correspond to the video channel presetting of the VCR.
Interference
in
Adjust the tracking control.
playback picture
Dust or dirt on video heads. Take the VCR to an Authorized
Service Station or dealer.
No
recording
The erasure-prevention
tab on the cassette has been
removed.
Timer recording is not
The startingday and
time have not been set correctly.
possible
The
clock time is not set correctly.
There has been a power interruption of more than 60
minutes.
13
Advertisement
Table of Contents
