Burst Settings - Sony DSC-WX7 User Manual

Cyber-shot User Guide
Operation Search
Before Use
Shooting
Viewing
Using 3D Functions
Using MENU items (Shooting)
Using MENU items (Viewing)
Changing settings
Viewing images on a TV
Using with your computer
Printing
Troubleshooting
Precautions/About this camera
Contents list

Burst Settings

You can select Single (single-image) or Burst as the shooting mode.
1. Press (Burst Settings) on the control wheel.
2. Select the desired mode with the control wheel.
The camera shoots a single image.
(Single)
The camera shoots up to 10 continuous frames in one burst when you hold
down the shutter button.
(Burst)
Notes
[Flash] is set to [Off].
When recording with the self-timer, a series of up to 10 images is recorded.
[Focus], [White Balance], and [EV ] are adjusted for the first image, and these settings are
also used for the other images.
When the battery level is low, or when the internal memory or a memory card is full, the
burst stops.
[VGA] image size will be set while recording on internal memory.
You may not be able to set some functions or MENU items depending on the selected REC
mode. For details, see "Functions not available in some REC modes"
items not available in some REC modes."
Related Topic
Burst Shooting Interval
Copyright 2011 Sony Corporation
Top page > Shooting > Using shooting functions > Burst Settings
[Details]
Print
[Details] and "MENU
Back to top
62